Custom tag with embedded TPU strap. Adjustable size, text, and strap length. No hardware needed.
This is a customizable tag with an embedded TPU strap, designed to create a flexible, durable attachment without hardware. You can adjust the tag size, top and bottom text, and strap length to fit anything from luggage and cables to bins, tools, or storage systems. The embedded strap design keeps everything secured while staying easy to attach, remove, and reuse across different setups.
Workshop Notes: Looking for feedback on strap thickness, feature requests/suggestions, and how this gets printed in a multi material setup.
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: PLA, PETG, ABS, ASA
Supports: Yes
Support Type: None
Notes:
- Leave ~0.3 mm clearance for reliable insertion
- Make sure the strap is fully seated before resuming
- No glue or hardware required
Materials Needed:
None
Instructions:
1. Print the TPU strap first. Use standard TPU settings. No supports needed.
2. Start the main (PLA/PETG) print. Add a pause right before the bridging layer that closes over the strap cavity.
3. Insert the TPU strap by placing it into the cavity. It should sit flush without force.
4. Resume the print. The printer will bridge over the strap and fully capture it inside the part.
5. Remove and use. Once finished, the strap is permanently embedded and ready to go.
By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.
Batch runs are a 3-step flow. You can revisit any step at any time.