Custom magnetic nameplate 3D printed with your text, plate size, and embedded magnet size using a manual color swap.
Create a custom 3D printed magnetic nameplate for single-extruder printers using a simple manual color swap.
Customize the text, plate dimensions, and embedded magnet size to make removable labels, signs, tags, or nameplates without needing an automatic filament changer. Ideal for shelves, toolboxes, lockers, bins, equipment, displays, and workshop organization.
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: PLA, PETG, ABS, ASA
Supports: No
Support Type: None
Notes:
- Check magnet polarity before inserting if the nameplate needs to match an existing magnetic surface or another printed part.
- Magnet fit can vary slightly by printer, filament, and magnet supplier, so test one plate before batch printing.
- No supports should be needed.
Materials Needed:
3x Magnets
Instructions:
Print the nameplate face-up on the build plate. The print includes two pause points: one to insert the magnets, and one for the color change on the debossed text.
At the magnet pause, place the magnets into the recessed pockets and make sure they sit fully below the surface before resuming the print. At the color change pause, swap to your text color, purge if needed, then resume printing.
Materials Needed:
Disclosure: As an Amazon Associate I earn from qualifying purchases.
Instructions:
By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.
Batch runs are a 3-step flow. You can revisit any step at any time.