Camera Siding Mount

Designed to mount two Amcrest cameras to the siding of a house. 

Custom designed adapter for mounting two cameras to the siding of a house. Designed for Amcrest outdoor cameras.

Printing Tips

Printing Technology: FDM

Layer Height: 0.2 mm

Perimeters: 4

Infill: 10%

Infill Pattern: Gyroid

Recommended Material: ASA, ABS, PETG

Supports: NoSupport Type: None

Notes:

May not work on all siding. 

Designed for Amcrest POE bullet cameras. 

Tested with PETG, has held up well, but ASA is recommended for UV exposure. 

Assembly Instructions

Materials Needed:6x M3 nuts
6x M3x12 bolts
2x Exterior Screws
Caulk
Instructions:

  1. Print mount
  2. Attach cameras to mount using M3 nuts and bolts
  3. Connect PoE cabling and tuck inside mount
  4. Caulk around perimeter and mount to wall
  5. Seal cabling gap with caulk

Customize Model

min: 25, max: 100
min: 40, max: 200
min: 2, max: 10

Measure twice, customize once.

Something doesn't look right, or not sure what a setting means?

Download your design

Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.

Legal Notice:

These files are not to be used for commercial purposes without prior written consent.

By downloading and using these designs, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.

Batch runs are a 3-step flow. You can revisit any step at any time.

Generates exactly N editable rows (1 to 200).
Working...
Notes: Changing column headers or adding/removing rows or columns will cause validation failure. Validation requires exactly 10 rows.
If validation fails, fix the CSV and re-upload here.
After validation, this button will enable. You can close this page after submitting.
Estimate: N/A