Customizable Cable Tag
Identify cables without adhesive labels. Customize this flexible TPU loop-on tag with your own text and cable diameter.
Cables are easy to mix up when several look alike. This customizable TPU cable label provides a simple way to identify power cords, USB cables, network cables, and other equipment wiring.
The flexible strap loops around the cable and feeds through the end of the tag, holding it in place through tension. No adhesive or separate fastener is required.
The design can be customized with your own text and cable diameter using the Lunar Prototypes browser-based generator. Generate a different label for each cable without modifying a CAD file.
The strap length adjusts with the selected cable diameter. Fit depends on the cable and TPU used, so printing a test label before making a larger set is recommended.
This is intended for identifying installed cables, not for pulling cables through walls or conduit.
Printing Tips
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: TPU
Supports: No
Support Type: None
Notes:
Print flat on the bed with the label face oriented upward.
Use TPU filament for the flexible strap.
Print a test piece to check fit and strap tension before making multiple labels.
For multicolor text, add a filament change at the appropriate layer if supported by your slicer.
Supports should not be necessary in the intended printing orientation.
Assembly Instructions
Instructions:
- Feed the flexible strap around the cable.
- Pass the strap through the opening at the opposite end of the label.
- Pull gently until the loop is snug around the cable.
- Position the label so the text is visible.
.webp?h=33d87e2ca80e44bef2c0d7bd505903ed)
Customize Model
By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.
Measure twice, customize once.
Something doesn't look right, or not sure what a setting means?
Download your design
Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.
Original files use the font saved in the design. To choose an available font for a new result, use Font at the top of Customize. Design default keeps the saved font.
Legal Disclaimer:
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.
Batch runs are a 3-step flow. You can revisit any step at any time.