Customizable Flower Frog

Customizable flower frog for vases, jars, and other rimmed containers to support stems without floral foam.

This customizable flower frog sits on the rim of a vase, jar, or other container to help hold flower stems in place for a cleaner, more controlled arrangement.

You can adjust the diameter and hole size to better match different containers and stem thicknesses, making it useful for fresh flowers, dried flowers, and repurposed containers that were not designed for arranging.

It is a simple way to create more stable floral layouts without relying on floral foam.ne

Printing Tips

Printing Technology: FDM

Layer Height: 0.2 mm

Perimeters: 4

Infill: 10%

Infill Pattern: Gyroid

Recommended Material: PLA, PETG, ABS, ASA

Supports: No

Support Type: None

Notes:
- The base design is sized for a standard mason jar rim at approximately 79 mm diameter.
- Diameter and hole size can be customized to better fit other jars, vases, and rimmed containers.
- PLA may work well indoors, PETG, ASA, or ABS are better choices for outdoor use or warm environments.
- Concentric infill gives the top surface a nice decorative pattern.

Assembly Instructions

Materials Needed:
1x Mason Jar or other circular container or vase

Instructions:

  1. Measure the rim diameter of the vase, jar, or container you want to use.
  2. Set the flower frog diameter to match that rim so it sits securely on top.
  3. Adjust hole size based on the stems you plan to arrange. Larger stems need larger openings, while smaller stems benefit from a tighter fit.
  4. Print flat as oriented on the build plate.
  5. Test fit on the container before arranging flowers, especially if your rim shape or diameter varies from the default.

Customize Model


min: 20 mm, max: 235 mm

min: 4, max: 12


min: 2 mm, max: 5 mm

min: 3.0 mm, max: 10 mm

min: 5 mm, max: 50 mm

min: 5 mm, max: 20 mm

By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.

Measure twice, customize once.

Something doesn't look right, or not sure what a setting means?

Download your design

Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.

Legal Disclaimer:

The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.

Batch runs are a 3-step flow. You can revisit any step at any time.

Generates exactly N editable rows (1 to 200).
Working...
Notes: Changing column headers or adding/removing rows or columns will cause validation failure. Validation requires exactly 10 rows.
If validation fails, fix the CSV and re-upload here.
After validation, this button will enable. You can close this page after submitting.
Estimate: N/A