Garden Hose Shield

A customizable garden hose shield designed to guide hoses around a flower bed and prevent flowers from being smushed. Looks like a mushroom. 

Printing Tips

Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: ABS, ASA, PETG
Supports: No
Support Type: None

Notes:
- Recommend ASA for outdoor use
- Spike should be printed with flat area on the build plate and increased perimeters

Assembly Instructions

Materials Needed: 
None

Instructions:
1. Print
2. Set housing and roller on ground
3. Hammer spike through housing
4. Screw on cap

Download Links

Legal Disclaimer:

The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.

Model Comments

Comments Section Under Construction

Feel free to submit feedback via the form below

Customize Model


min: 100 mm, max: 235 mm

min: 100 mm, max: 235 mm

min: 20 mm, max: 50 mm


min: 20 mm, max: 235 mm

min: 10 mm, max: 50 mm

min: 10 mm, max: 50 mm

min: 5 mm, max: 20 mm

min: 0 mm, max: 1 mm

min: 0 mm, max: 1 mm

min: 100 mm, max: 200 mm

By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.