Custom tablet wall mount generator with adjustable width, thickness, port slots, and screw sizing.
Tablet wall mount generator that creates a custom-fit mount based on your device dimensions. Adjust width, height, and thickness, add side cutouts for ports and cable clearance, and select screw size and mounting hole spacing.
Designed to fit a wide range of tablets and mounting setups with minimal modification.
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: PLA, PETG, ABS, ASA
Supports: Yes
Support Type: Tree
Notes:
- Supports required, recommend tree supports.
- For toolchangers/multi material printers, recommend PETG interface if mount is printed in PLA.
Materials Needed:
1x Tablet
Instructions:
1. Measure length and width of tablet.
2. Measure distance from base of tablet face to first port for both sides.
3. Measure distance between start of first port and end of last port.
4. Repeat for both sides.
5. Set dimensions in customizer and generate.
6. Print & mount.
By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.