Cable Organizer - Parametric

Customizable 3D printable cable spool with TPU strap. Great for organizing cords, cables, or rope.

Customizable 3D printable cable spool with TPU strap. Great for organizing cords, cables, or rope.

Printing Tips

Printing Technology: FDM

Layer Height: 0.1 mm

Perimeters: 4

Infill: None

Infill Pattern: None

Recommended Material: TPU, PLA

Supports: No

Support Type: None

Notes:

Printed with 0.1 mm layer just to get as much detail out of the logo and lettering as possible. 

TPU required for strap. 

Assembly Instructions

Materials Needed:None
Instructions:

  1. Print desired file and associated strap
  2. Thread strap from the outside to the inside using the hole under the logo
  3. Loop strap into hole
  4. Spool cables
  5. Loop strap around and insert into opposite hole 

Customize Model


min: 30mm, max: 500mm

min: 5mm, max: 500mm
Note: Length must be greater than width

min: 15mm, max: 500mm

By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.

Measure twice, customize once.

Something doesn't look right, or not sure what a setting means?

Download your design

Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.

Legal Disclaimer:

The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.

Batch runs are a 3-step flow. You can revisit any step at any time.

Generates exactly N editable rows (1 to 200).
Working...
Notes: Changing column headers or adding/removing rows or columns will cause validation failure. Validation requires exactly 10 rows.
If validation fails, fix the CSV and re-upload here.
After validation, this button will enable. You can close this page after submitting.
Estimate: N/A