Customizable Furniture Leg

Fully customizable 3D printed table leg with adjustable height, offset, angle option, screw diameter, and mounting plate

This customizable table leg is designed to fit a wide range of furniture by letting you adjust height, offset, angle, screw diameter, and plate dimensions. It’s a strong printable solution for repairs, replacements, or new builds. Dial in the exact geometry you need and match your furniture without compromise.

Printing Tips

Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: ABS, ASA
Supports: No
Support Type: None

Notes:
- Recommend at least four walls.
- Recommend wide nozzle diameter to increase layer adhesion.

Assembly Instructions

Materials Needed: 
None

Instructions:
1. Measure original part.
2. Input parameters into customizer, generate custom fit.
3. Import into slicer, splitting print just above base to confirm screw fit and reduce waste. 
4. Confirm fit, adjust, and print full model.  

Customize Model


min: 20 mm, max: 235 mm

min: 20 mm, max: 50 mm

min: 20 mm, max: 50 mm

min: 5 mm, max: 10 mm

min: 3 mm, max: 235 mm

min: 2 mm, max: 15 mm

min: 0 degrees, max: 360 degrees

min: 20 mm, max: 235 mm


min: 2 mm, max: 15 mm

min: 2 mm, max: 10 mm

min: 0 mm, max: 235 mm

min: 20 mm, max: 235 mm

min: 20 mm, max: 235 mm

By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.

Download Links

Legal Disclaimer:

The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.