Generate a 3D-printable replacement drawer or cabinet handle sized to your existing screw spacing, screws, and hex nuts.
Replace a broken drawer or cabinet handle without drilling new holes. Measure the center-to-center spacing between the existing screw holes, then customize the handle and embedded nut pockets to fit the screws and hex nuts you already have.
What to Measure - Center-to-center distance between the screw holes
- Screw diameter
- Hex nut width across the flats
- Hex nut thickness
- Desired clearance between the handle and drawer face
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: ABS, ASA, PETG, PLA, TPU
Supports: No
Support Type: None
Notes:
- Tested with PLA. Recommend stronger material for heavy duty use.
Materials Needed: 2x hex nuts
2x screw
Instructions:
By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.
Something doesn't look right, or not sure what a setting means?
Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.
Original files use the font saved in the design. To choose an available font for a new result, use Font at the top of Customize. Design default keeps the saved font.
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.
Batch runs are a 3-step flow. You can revisit any step at any time.