Voron 2.4 4inch Duct Adapter

Adapt a 4 inch (100mm) exhaust duct to the existing backing of the Voron 2.4.

Adapt a 4in (100mm) exhaust duct from above to the Voron 2.4 backing. A practical 3D printed solution for top-mounted ventilation.

Printing Tips

Printing Technology: FDM

Layer Height: 0.2 mm

Perimeters: 4

Infill: 40%

Infill Pattern: Gyroid

Recommended Material: ABS, ASA

Supports: No

Support Type: None

Notes:

- No supports needed

Assembly Instructions

Materials Needed: 6x M3 Heat set Inserts4x M3x8 socket head screws2x M3x12 Socket Head ScrewsInstructions:

  1. Print all pieces and insert heat sets.
  2. Replace stock backing with duct mount. 
  3. Screw Duct Adapter into ducting
  4. Screw adapter to duct mount with M3x8 screws

Customize Model

By using the customization software, you agree to our Privacy Policy, Terms of Service, Disclaimer, EULA, and Cookie Policy.

Measure twice, customize once.

Something doesn't look right, or not sure what a setting means?

Download your design

Choose a file below and open it in your slicer. For designs with several components, download every part you need. Original files use the design defaults; your customized files appear here after generation.

Legal Disclaimer:

The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.

Batch runs are a 3-step flow. You can revisit any step at any time.

Generates exactly N editable rows (1 to 200).
Working...
Notes: Changing column headers or adding/removing rows or columns will cause validation failure. Validation requires exactly 10 rows.
If validation fails, fix the CSV and re-upload here.
After validation, this button will enable. You can close this page after submitting.
Estimate: N/A