A fun analog mechanical clock featuring a visible planetary gear system for helping kids learn time.
A fun 3D printable analog mechanical clock featuring a visible planetary gear system for helping kids learn time.
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: PLA
Supports: No
Support Type: None
Notes:
Only requires one planet gear to function, but more is more fun.
Materials Needed:
None
Instructions:
1. Print all pieces
2. Align outer ring notches with notches in lower case, and press into place. Note, build plate side must be down.
3. Locate 12:00 position, which is the slightly indented area of the lower case.
4. Using the 3 spoke planet gear, align first planet gear by placing the spoke with a tooth directly above it in the groove closest to the lower case indent.
5. Place sun gear so that the point of the hexagonal hub is pointing directly up toward 12:00.
6. Align other gears by pressing into place, ensuring the first planet gear and sun gear positions are not disturbed.
7. Press upper case clock face onto lower assembly, starting with the 12:00 position.
8. Insert hour hand shaft into first planet gear hub.
9. Insert minute hand shaft into sun gear hub.
10. Screw minute hand retention nut into threading on the back.
Choose a file below and open it in your slicer. For designs with several components, download every part you need.
The files provided here are for personal, non-commercial use only. Redistribution, modification, or commercial use is not allowed without prior written consent from Lunar Prototypes.